Dual source energy meter

Prepaid Dual source Meter Is specially designed for 3-Phase energy measurment applications where dual AC sources are available .It measures and stores Active Energy of utility source as well as alternate DG source. It also provide the facility to trip user load in event user exceeds KW set point or current set point .
Supply voltage – 90 V to 280 VAC, 50Hz., Three phase voltage input.
User can set the set point for KW and current for utility.
ISI,BIS Marked
The following Features are available.:-
1. Disconnection at zero balance or with grace period.( provided under PC software control)
2. 3 SMS alert to be sent before disconnection, these SMS should go automatically at predefined values, having low credit.
3. Disconnection only during working hours in case of zero balance, no disconnection at night or on holidays or sundays.
4. Live reading to be displayed on PC for DG & EB along with actual load along with live balance. 5. Overload limit for DG, automatic disconnection if limit is crossed and connected automatically when limit is reduced (set point control on KW and Current parameter for DG as well as EB)
6. On PC there is an indication that which meter is working & mode of supply (with color codes) and if off (if possible reason of off {vacate, disconnection due to overload, disconnection due to low credit}
7. Connection, disconnection features to be inbuilt in the meter itself no need to use external contactor till 60 amp whole current 3 phase.
8. In software there is an provision of deducting the energy charges at different rates for EB & DG as per consumption.
9. There is an provision for deducting maintenance charges on daily basis (example: if total maintenance charges are Rs. 300.00 then meter should deduct Rs. 10.00 every day)
10. There are four to five heads in maintenance charges every month
11. In case the balance in the meter goes to zero the power supply should be disconnected but the software should keep calculating maintenance charges & should show the balance in –ve and as and when consumer comes for recharge first these – ve charges shall adjust and then recharge should take place.
12. There is an provision of penalty in case of cheque bounce or overdrawing of sanction load.
13. There is an provision of reconciliation of energy data and payment data.
14. If by mistake someone has done a wrong recharge there is an provision of correcting the same. ( provided under password control)
15. Recharge will happen (through PC.)
16. Automatic Billing along with recharge history of that month.
17. In case of Villa’s wireless DG sensing & DATA accusation can be given with GSM Modem
19. Meter log (electricity using pattern) for each consumer at any given time.
20. Above 100A load, CT will be provided extra with Prepaid meters.

Additional Information:

• Minimum Order Quantity: 150 Piece

We offer to our clients all types of Prepaid Energy Meters as mentioned below. We also offers Engine Safety Unit, Energy meters, Maximum Demand Controllers, Prepaid Dual Source Meters, Dual Source energy meters, Multifunction meters, Prepaid Meters, Energy Meter, Electronic Energy Meter, Digital Energy Meter, Panel Meter, Digital Panel Meter, Dual meters, Single Phase Electronic Meters, Power Meters, Wires, Power Cables, Secure Energy Meter, Enertrak, Energy Meter, Power & Energy Meters, Amperemeter and Voltmeter.

Additional Information:

• Minimum Order Quantity: 50 piece

EM6438-EM 6436 Dual Source Energy Meter - India’s most sold Dual Source Energy Meter for Utility & Generator Monitoring – LED Display type;
Accuracy Class 1.0, 0.5 as per IEC 62052-11/ IEC 62053-22
G Smart Sensor indicator for Generator running mode
Monitors electrical parameters : Voltage, Amps, F, PF, W/VA
Monitors Integrated Parameters :  Wh/Vah Utility & Generator seperately
Monitors Runhours & On hours Utility & Generator Seperately, Interrupts
Demand Monitoring 
Color coded analog load bar indicators

Additional Information:

• Minimum Order Quantity: 20 Piece